HULK Earth Anchor Wire Rope Assemblies are a general purpose earth anchor assembly with minimum breaking loads up to 45kN. With fast, labour-saving installation, these general purpose anchor assemblies can be used in a wide range of applications from tying down portable buildings, guying applications, theft prevention among many others.
HULK Earth Anchors with Wire Rope tendons offer the following benefits:
- Fast, labour saving installation
- Immediate holding capacity
- Proof Tested holding capacity
- Concrete free anchoring solution
- No digging or excavation
- No soil disturbance
For applications where higher holding capacities are required, HULK HG-Range Earth Anchors with wire rope tendons are also available on request, and are manufactured according to project requirements.
HULK Earth Anchor Wire Rope Assemblies
The anchor assembly consists of a HULK Earth Anchor head with a swaged wire rope tendon attached. Tendons are available in two configurations including:
- Wire rope with swaged thimble eye.
- Wire rope with open end and wire rope grips.
Both of the above options are available in either galvanised, or stainless steel wire rope assemblies.
HULK EARTH ANCHORS WITH GALVANISED WIRE ROPE AND THIMBLE EYE |
|||||
|---|---|---|---|---|---|
| Anchor Model |
Anchor Head | Anchor Tendon | Minimum Breaking Load |
Quantity per Case |
Weight per Case |
| HP25 | HULK HP25 Anchor Head | 3mm X 600mm Galvanised wire rope tendon with swaged soft eye | 7kN | 50 | 4kg |
| HP35 | HULK HP35 Anchor Head | 6mm X 1000mm Galvanised wire rope tendon with swaged soft eye | 45kN | 20 | 8kg |
| H50* | HULK H50 Anchor Head | 8mm X 1200mm Galvanised wire rope tendon with swaged thimble eye | 45kN | 15 | 15kg |
| H80* | HULK H80 Anchor Head | 8mm X 1200mm Galvanised wire rope tendon with swaged thimble eye | 45kN | 12 | 15kg |
| H110* | HULK H110 Anchor Head | 8mm X 1200mm Galvanised wire rope tendon with swaged thimble eye | 45kN | 10 | 18kg |
| *Note: These anchor assemblies have the same Minimum Breaking Load, different anchor sizes cater for hard, medium and soft soils. | |||||
HULK EARTH ANCHORS WITH GALVANISED WIRE ROPE AND WIRE ROPE GRIPS |
|||||
|---|---|---|---|---|---|
| Anchor Model |
Anchor Head | Anchor Tendon | Minimum Breaking Load |
Quantity per Case |
Weight per Case |
| HP25-OE | HULK HP25 Anchor Head | 3mm X 1.5m Galvanised wire rope tendon and 2 off Wire Rope Grips | 7kN | 50 | 4kg |
| HP35-OE | HULK HP35 Anchor Head | 6mm X 2.0m Galvanised wire rope tendon and 3 off Wire Rope Grips | 45kN | 20 | 8kg |
| H50-OE* | HULK H50 Anchor Head | 8mm X 2.5m Galvanised wire rope tendon and 3 off Wire Rope Grips | 45kN | 15 | 15kg |
| H80-OE* | HULK H80 Anchor Head | 8mm X 2.5m Galvanised wire rope tendon and 3 off Wire Rope Grips | 45kN | 12 | 15kg |
| H110-OE* | HULK H110 Anchor Head | 8mm X 2.5m Galvanised wire rope tendon and 3 off Wire Rope Grips | 45kN | 10 | 18kg |
| *Note: These anchor assemblies have the same Minimum Breaking Load, different anchor sizes cater for hard, medium and soft soils. | |||||
HULK EARTH ANCHORS WITH STAINLESS STEEL WIRE ROPE AND THIMBLE EYE |
|||||
|---|---|---|---|---|---|
| Anchor Model |
Anchor Head | Anchor Tendon | Minimum Breaking Load |
Quantity per Case |
Weight per Case |
| HP25SS | HULK HP25 Anchor Head | 3mm X 600mm Stainless steel wire rope tendon with swaged soft eye | 6.5kN | 50 | 4kg |
| HP35SS | HULK HP35 Anchor Head | 6mm X 1000mm Stainless steel wire rope tendon with swaged soft eye | 10.3kN | 20 | 8kg |
| H50SS* | HULK H50 Anchor Head | 8mm X 1200mm Stainless steel wire rope tendon with swaged thimble eye | 38kN | 15 | 15kg |
| H80SS* | HULK H80 Anchor Head | 8mm X 1200mm Stainless steel wire rope tendon with swaged thimble eye | 38kN | 12 | 15kg |
| H110SS* | HULK H110 Anchor Head | 8mm X 1200mm Stainless steel wire rope tendon with swaged thimble eye | 38kN | 10 | 18kg |
| *Note: These anchor assemblies have the same Minimum Breaking Load, different anchor sizes cater for hard, medium and soft soils. | |||||
HULK EARTH ANCHORS WITH STAINLESS STEEL WIRE ROPE AND WIRE ROPE GRIPS |
|||||
|---|---|---|---|---|---|
| Anchor Model |
Anchor Head | Anchor Tendon | Minimum Breaking Load |
Quantity per Case |
Weight per Case |
| HP25-SOE | HULK HP25 Anchor Head | 3mm X 1.5m Stainless steel wire rope tendon and 2 off Wire Rope Grips | 6.5kN | 50 | 4kg |
| HP35-SOE | HULK HP35 Anchor Head | 6mm X 2.0m Stainless steel wire rope tendon and 3 off Wire Rope Grips | 10.3kN | 20 | 8kg |
| H50-SOE* | HULK H50 Anchor Head | 8mm X 2.5m Stainless steel wire rope tendon and 3 off Wire Rope Grips | 38kN | 15 | 15kg |
| H80-SOE* | HULK H80 Anchor Head | 8mm X 2.5m Stainless steel wire rope tendon and 3 off Wire Rope Grips | 38kN | 12 | 15kg |
| H110-SOE* | HULK H110 Anchor Head | 8mm X 2.5m Stainless steel wire rope tendon and 3 off Wire Rope Grips | 38kN | 10 | 18kg |
| *Note: These anchor assemblies have the same Minimum Breaking Load, different anchor sizes cater for hard, medium and soft soils. | |||||
Anchor holding capacity is soil dependent. HULK Smasher drive rod sold separately.